To Next PageTo Next Page
Need help?Do you have a question about the SNOWJOE SJ906 and is the answer not in the manual?
Covers critical safety warnings and precautions for operating the machine.
Details operator qualifications and training requirements for safe operation.
Outlines essential pre-operation checks and area preparation steps.
Covers routine maintenance tasks and proper storage procedures.
Details warnings and restrictions regarding engine modifications.
Highlights the importance and maintenance of the spark arrester system.
Details the steps for safely removing the snow thrower from its packaging.
Instructions for connecting the upper and lower handle sections.
Explains how to assemble and adjust the chute direction controls.
Specifies the type and octane of gasoline suitable for the engine.
Details the procedure and precautions for adding fuel to the snow thrower.
Instructions and warnings for adding engine oil before operation.
Instructions for using the electric starter system for engine ignition.
Instructions for starting the engine using the recoil starter method.
Explains how to engage the drive system for moving the snow thrower.
Details how to engage the auger system for throwing snow.
Procedure for testing the auger control functionality before use.
Instructions for adjusting the auger control cable for proper function.
Explains the interaction between drive and auger controls.
Procedure for safely clearing snow or ice from the chute assembly.
Provides advice for more efficient and effective snow throwing.
Refers to the Auger Control Test for adjustment instructions.
Steps for adjusting the drive control and shift lever mechanisms.
Instructions for adjusting the shift cable for proper speed selection.
Guidance on adjusting skid shoes for different ground conditions.
Notes on minor carburetor adjustments for varying conditions.
Details the lubrication points and schedule for the snow thrower.
Detailed steps for preparing and storing the unit for extended periods.
Instructions for periodic inspection and adjustment of the engine.
Information on auger security, shear pins, and replacement.
General| Model | SJ906 |
|---|---|
| Power Source | Electric |
| Wheels | Yes |
| Clearing Width | 18 inches |
| Cutting Depth | 10 in. (25 cm) |
| Warranty | 2-Year Warranty |
