6
ENGLISHENGLISH
1. Open truck tailgate and rear door of cap.
2. Using a forklift or (4) four people, place the cap
on the truck. (Make sure not to damage the
truck cab or bed.)
3. Square cap on truck bed from side to side and
flush to front of truck bed. Cap should overhang
the rear of the truck bed by 7/16”. Align cap door
opening with truck tailgate opening.
4. Close the truck tailgate and cap rear door.
Check fit and function of door, handle, and seals.
5. Adjust as necessary for proper fit.
PLACING THE CAP ON THE TRUCK
Adjust as necessary
for proper fit.
Open truck tailgate and
rear door of cap, using a
forklift or (4) people place
the cap on the truck.
To Next Page
Loading...