Snuza PICO 2 User Manual

English
Page 8
. 5 QUICK START GUIDE
Step 1: Charge your Pico
Attach the power cord to the charging cradle. Ensure that the Pico is
seated on the charging cradle and close the case lid shut. Leave your
Pico on charge for 1 hour.
Step 2: Download the Snuza Connect App
Snuza Connect is available on iOS and Android.
View iOS App guide: (insert link)
View Android App guide: (insert link)
smartphone minimum requirements:
• Must support: Bluetooth 4.0
• Apple devices: iOS 8.0 or later
• Android devices: Android 5.0 or later
Step 3: Register your Pico
Go to connect.snuza.com. Select the register new membership option
and complete the required elds.
A conrmation email will be sent to your selected email address. Once
conrmed, you will be taken to the Snuza Portal. Navigate to the ‘Device
Registration’ tab in the menu.
Enter your device serial number and complete the required detail elds.
The serial number can be found on the side of the Pico, or on the side of
the Pico packaging.
Step 4: Attach Your Pico
Fold over the top edge and t the diaper snugly. Lift the clip to release
and place the Pico on your baby’s diaper. Ensure that the clip is properly
closed once placed.
Step 5: Turn on Your Pico & Start Monitoring
Turn on the Pico by pressing the power button down until the start-up
tone is heard and all indicator lights ash simultaneously. Immediately
after the start-up sequence, the battery light will ash green to indicate
that the battery is fully charged. Sync your smartphone with the The Pico
by simply pressing the refresh icon on the app screen. You can now start
monitoring your baby from your smartphone.

Snuza PICO 2 Specifications

General

Connectivity	Bluetooth
Low Movement Alarm	Yes
Movement Rate Alarm	Yes
Suitable Age	0-12 months
Type	Wearable Baby Monitor
App Compatibility	iOS and Android
Battery	Rechargeable Lithium
Certification	CE, FCC