English
Page 1
1. IMPORTANT - PLEASE READ FIRST!
The Pico is designed to attach to your baby's diaper or child's pajama
pants while they sleep and will continously monitor breathing motion,
skin temperature, sleep position and sleep state. If connected, the
information is streamed to your smartphone via BLE (Bluetooth low
energy) technology.
Up to four (4) Pico's can be linked to a smartphone at one time.
Only one (1) smartphone can monitor your baby at a time.
ALWAYS:
Use the correct size diaper (nappy) to ensure that
the Pico sits securely and squarely on the diaper.
To ensure a rm grip, fold the top of the diaper
over before attaching the Pico. If neccesary, use
the diaper adjusters to provide a snug t around
your baby's tummy.
To attach the Pico, lift the top lever to release the
clip. Slide the Pico onto the waistband or your
child's pants or baby's diaper, placing your ngers
between the clip and skin to ensure that the
skin does not get pinched between the clip and
clothing/diaper. A baby's skin is especially supple
and this can happen quite easily. Close the lever to secure the Pico into
place. Double check to ensure that no skin is caught in the clip.
Switch the Pico on by briey pressing the power button. All indicator lights
will ash and a start-up tone will be heard. Alternatively, switch the Pico
on by pressing the power button in the app. The start-up tone will be silent
if controlled via the app. Immediately after the start-up sequence, the
battery light will ash to indicate the battery state of charge. If not already
connected to your app, press the "Connect" button in the app overview
screen to initiate the connection to your phone.
To Next Page
Loading...
Need help?
General
