Need help?Do you have a question about the Soca ST-320 and is the answer not in the manual?
Details indicator lights, bar indicator lights, and keys on the front panel.
Describes three types of proximity cards (SC-10, SC-20, SC-30) required for registration.
Procedure for registering a single user's proximity card and utilizing proximity for registration.
Procedure for deleting a user's card, such as when it is lost.
Steps to change the 8 sets of user-defined passwords for access control.
Setting the door unlock duration, adjustable from 01-99 seconds.
Configuration of the four available door-opening identification modes for access control.
Procedure for registering multiple cards or key tags in series.
Configuration for enabling or disabling the anti-tamper output based on reader or door detection.
Procedure to change the master system password from the default.
Function to delete all 8 sets of user passwords simultaneously.
Function to delete all registered cards and key tags from the system.
How to open the door using the system password.
Setting up a special duress code for emergency door opening and alarm.
Details the wiring diagram and connections for the 8-pin, 6-pin, and 2-pin connectors.
Explains the connection procedures for electric locks (fail-secure/fail-safe) and exit push buttons.
Details the installation and wiring for door sensors, external relays, and sirens.
Solutions for when a card is sensed but the door fails to unlock.
Troubleshooting steps when the system password is entered but access to setting modes is denied.
Guidance on configuring and utilizing the duress code for emergency access.
Procedures to stop or reset anti-damage or duress alarm activations.
Explanation of the door sensor detection function and its activation trigger.
General| Brand | Soca |
|---|---|
| Model | ST-320 |
| Category | Control Unit |
| Language | English |
To Next Page