APPENDIX F: COMMAND BARCODES 103
Apple iOS Onscreen Keyboard — For HID Mode Only
Scan to Enable Description Scan to Disable
With Beep when onscreen keyboard appears
No Beep when onscreen keyboard appears
Double-press CHS
power button to
access onscreen
keyboard of
Apple device.
(default with
beep)
Data Mode — For SPP Mode Only
Packet Mode (default)
Configures the CHS to transmit decoded data in packet format.
Raw Mode
Configures the CHS to transmit decoded data in raw (unpacketed) format.
DO NOT scan this barcode in iOS mode.
The data mode command barcodes are for SPP mode only, DO NOT scan them in iOS or HID mode.
To Next Page
Loading...
