Socket 7Mi - Setup for Blackberry

78
7 | Setup for BlackBerry
This chapter explains how to install and use the Bluetooth
Cordless Hand Scanner (CHS) with one of the following
BlackBerry devices:
 BlackBerry® Bold 9700 Smartphone running BlackBerry OS
5.0.0.714 or later. Other models have not been tested
with SocketScan 10 and may require a previous software
version. Works in Bluetooth SPP mode only.
 BlackBerry PlayBook running QNX. Works in Bluetooth
HID mode only.
Before you begin the instructions in this chapter, make
sure you have installed the batteries (and tether, if
desired), and charged the scanner, as described in
Chapter 2, “Scanner Setup”