Socket 7Mi - Page 22

22
OPTION 1: USING THE CHS IN HID MODE
Compatible with Android 2.2 and later devices that support HID for Peripheral
devices.
To pair the CHS with your Android device:
You only need to pair the CHS with your Android device the first time you try to
connect.
1. Power on the CHS. Press and hold the small power button until the LED turns blue and
the CHS beeps twice (low-high).
The LED blinks blue once per second to show that the Bluetooth radio is on but not
connected.
2. Make sure the CHS is in HID mode for Peripheral Devices.
First scan this barcode to change the CHS to HID mode for Peripherals.
IMPORTANT! Print out this page to scan the barcode. Do not scan it onscreen.
3. Touch Home | Menu | Settings | Wireless & networks | Bluetooth settings.