30
13. Touch 1D Scanner.
13. In the list of paired devices, touch Socket CHS. When notified of a pairing request,
swipe the notification down. Touch Pairing request. Touch Pair.
The CHS will beep once when it has connected and is ready to scan barcodes.
The LED will also blink blue once every 3 seconds, and the icon at the top of
the screen will also change.
Status Bar Icon
CHS not connected.
CHS connected.
14. Touch Back
to close Socket EZ Pair.
15. A Socket registration icon
will appear at the top of the screen. Swipe the icon
down to open the scanner registration software.
16. Follow the instructions to register the scanner or touch Cancel to register later.
To Next Page
Loading...
