Socket 7Mi - Page 33

CHAPTER 4: SETUP FOR ANDROID 33
Configuration
1. In the main screen of Scanner Settings, touch Menu | Configuration.
2. In the Configuration screen, enter the appropriate settings:
 Good scan beep: Select to have the CHS beep to indicate that data was successfully
decoded and transmitted to the Android device.
 Good scan flash: Select to have the CHS LED turn green to indicate that data was
successfully decoded and transmitted to the Android device.
 Vibrate mode: Select to have the CHS vibrate to indicate that data was successfully
decoded and transmitted to the Android device.
 Scanned data suffix: Select if you would like to automatically add a carriage return,
tab or select another character or function after each scan of data.