CHAPTER 5: SETUP FOR WINDOWS PC 55
8. Click on the Symbologies tab to modify which symbologies the CHS will be able to
decode.
Enabling all possible symbologies may slow the decoding process.
The RSS symbology is now known as GS1 DataBar.
If you want to read UPC-A symbols, disable the GS1 DataBar option so that GS1 DataBar
symbols don’t get mistakenly decoded.
9. Click OK to exit the Scanner Properties. If desired, click Test to test scanning a
barcode. The Scan Window will appear.
10. Scan a barcode that you would like information about. The Scan Window will report
the barcode’s symbology, data length, and data, in your choice of ASCII or
Hexadecimal format.
To Next Page
Loading...
