Socket 8 Series - Beep Patterns

STATUS INDICATORS
Beep Pattern Meaning
Low-high tone Power On
High-low tone Power Off
High-high tone An adequate USB charging port is detected.
1 low beep Keyboard Pop-up Enable - HID mode in iOS device
only
1 beep CHS connected to device and ready to scan
barcodes.
2 beeps, same
tone
CHS disconnected from device.
1 beep with
Green LED blink
Data successfully scanned.
1 long beep The CHS tried multiple times unsuccessfully to
connect to the last device it paired with. After 5
minutes the CHS will power off.
3 beeps with
escalating tone
CHS recognized the Command Barcode and
implemented the change.
3 beeps with
escalating tone
followed by a
long tone
This command barcode is not appropriate for this
proleforyourCHS.VerifytheCommandBarcode
is valid and retry. Scan did not work.
21