18
4. Tap Socket S700[xxxxxx] in the list of other devices found. After
a few seconds the status will change to “Connected” and the scanner
blue LED will stop blinking and turn solid blue.
Note: The characters in brackets are the last 6 characters of the
Bluetooth Address.
5. Launch your scanner-enabled Application. The scanner will beep
once indicating that it is connected to the appropriate application.
Now you are ready to scan barcodes!
Please check with your scanner application vendor or visit
www.socketmobile.com/appstore to confirm your scanner-enabled
application supports the scanner.
To Next Page
Loading...
