15
Connect Android device in Application Mode
Install Software
1. Go to GooglePlay Store and search for “SocketScan ”.
2. Download & install. Follow the on screen instructions.
Getting Started
3. Follow the on screen instructions.
4. Scan the barcode on the screen.
5. Tap the ON SCREEN option.
6. Tap on 2D SCANNER option.
7. Scan the barcode on the device screen. Wait a few seconds. The
scanner will beep 3 times indicating it has accepted the command to
connect to your device.
8. When notied of a pairing request, select “Ok”.
9. The scanner will beep once to indicate connected state and is ready to
scan barcodes. Tap Back to close.
Now you are ready to scan barcodes!
To Next Page
Loading...
