Socket SocketScan S730 - Timer Setting Command Barcodes (8 Hours)

45
COMMAND BARCODES (CONTINUED)
For busy days on the job, try using the Active Mode to keep you moving faster.
Avoid the hassle of turning the scanner on again and reconnecting to your host
device.
Scan one of the barcodes below and recongure the scanner to remain on longer.
Note: Turn o the host device’s Bluetooth prior to scanning one of the alternate
timer barcodes. Then turn the Bluetooth back on.
*These settings drain the battery faster. Please ensure the scanner is charged
daily.
Bluetooth Connection Modes
Scanner Always On*
Congures the scanner to
never power o.
#FNB012100000000#
Continuous Power for 8 hours*
Scan Barcode to congure the
scanner to remain on for 8
hours.
#FNB012101E001E0#