Featuring Celios Advanced Air Purification Technology
18
Install Batteries into the Core
1. There are two slots for the Lithium Ion Smart
Batteries above the Pre Filter you just installed.
Pull the silver wire and rotate it upwards.
2. Take one Lithium Ion Smart Battery and align
the battery slots to the slots within the unit. The
unit will beep when the first battery is correctly
installed.
Take the second battery and do the same. Note
you will not hear a beep with the second battery.
Also, note battery label orientation may not
reflect illustration.
Place the silver wire back into position and
replace the back cover onto the Core unit.
Silver Wire
A000849-11_Rev C-SCAP IFU_7.5x5_NO 2400_011221.indd 18A000849-11_Rev C-SCAP IFU_7.5x5_NO 2400_011221.indd 18 1/12/21 10:09 AM1/12/21 10:09 AM
To Next Page
Loading...
