SOCO MC-275F - Adjustment of Saw Blade Low Stop Position; Adjustment of Saw Blade Rotating Speed; Adjustment of Miter Cutting

12
0.8～1.0
240 280 280 320
1.0～1.2
220 240 240 280
1.2～1.6
200 220 240 240
1.6～2.0
180 200 220 220
Diameter
D≧10 mm
2.0～2.5
150 180 180 200
D≧15 mm
2.5～3.5
120 150 150 180
D≧20 mm
3.5～4.5
90 120 120 150
D≧25 mm
4.5～5.5
80 80 90 120
D≧30 mm
5.5～7.0
64 64 80 90
D≧40 mm
For Wall Thickness≧2 mm, the Formula for Number of Tooth T is as following
T= 2×(Diameter of Saw Blade×3.14)÷(Wall Thickness of Tube)
Number of Saw Blade Tooth (T) for Mild Steel Solid Bar Cutting
Diameter of Saw Blade ( mm ) Size of Bar
( mm )
Φ250 Φ275 Φ300 Φ350
6～10
T=180 200 200 220
10～14
160 160 180 200
14～18
150 160 160 180
18～22
120 150 150 160
22～28
90 90 120 160
28～35
80 80 90 120
35～45
70 70 80 90
45～50
64 64 70 80
For Size of Bar≧38 mm, the Formula for Number of Tooth T is as following
T= 4×(Diameter of Saw Blade×3.14)÷(Size of Bar)
1. For stainless steel, the number of tooth is one grade more than mild steel.
2. For aluminum and copper, the number of tooth is one grade less than mild steel.
3. For 45° miter cutting, the number of tooth is one grade less than 90° cutting.
5.1.3 Adjustment of the Saw blade Low Stop Position
(1) Pull down the handle to the position that the saw blade just breaks through the work
piece.
(2) Adjust the bolt and lock nut that is under the saw head to just stop the saw head going
down.
5.1.4 Adjustment of the Saw Blade Rotating Speed
Turn the saw blade speed-selecting switch to one of "LOW”, "HI" or "OFF" position.
5.1.5 Adjustment of the Miter Cutting