3
1. SAFETY PRECAUTION
(1) Operator of the machine shall read the operation instruction carefully and understand
the safety requirement and the function of all parts of machine thoroughly.
(2) Only the authorized and dedicated operators are allowed to operate the machine.
(3) The machine is designed and manufactured to meet the applicable safety regulation
of your country. Please do not remove or modify any safety device or parts, such as
safety cover and guard of saw blade, emergency stop button, etc.
(4) Assure the correct electric power, such as capacity of voltage, amperage and
protection, is connected to the machine before operation.
(5) Please wear a pair of goggles when operating the machine.
(6) Please push the emergency stop button and turn off the main switch immediately
when any malfunction or emergency situation should occur.
(7) Please disconnect the electric power when install, maintain, repair or disassemble the
machine.
(8) Please pay extreme attention to adjust or exam the machine with electric power has
been connected.
(9) Please operate the machine in a bright and clean environment
(10) Please clean and maintain the machine periodically to assure the machine running in
proper condition.
(11) Do not operate the machine excess its allowable condition.
To Next Page
Loading...