2
CONTENTS
1. SAFETY PRECAUTION-----------------------------------------------------------3
2. SPECIFICATIONS AND OUTLINE DRAWING-------------------------------4
2.1 Technical Data
2.2 Cutting Capacity
2.3 Accessory
2.4 Outline Description
3. INSTRUCTION OF INSTALLATION-------------------------------------------8
3.1 Unpacking and Inspection
3.2 Lifting, Moving and Anchoring
3.3 Connecting Electric Power
3.4 Filling coolant
3.5 Procedure to install the stopper
4. FUNCTION OF CONTROL DEVISES----------------------------------------10
5. INSTRUCTION OF OPERATION----------------------------------------------11
5.1 Preparation for Operation
5.1.1 Adjustment of Clamping Vise
5.1.2 Installation of Saw Blade
5.1.3 Adjustment of Saw Blade Low Stop Position
5.1.4 Adjustment of Saw Blade Rotating Speed
5.1.5 Adjustment of Miter Cutting
5.2 Steps of Operation
5.3 Daily Inspection and Maintenance
6. ELECTRICAL SYSTEM DIAGRAM------------------------------------------13
7. PARTS DRAWING AND LIST--------------------------------------------------14
To Next Page
Loading...