1. FOREWORD 4
2. SAFETY REQUIREMENT
4
2. 1. Using conditions 4
2. 2. dELPHYs grEEn PowEr oPErating rEfErEncE 4
3. ENVIRONMENT 4
3. 1. rEcYcLing of ELEctricaL ProdUcts and EqUiPmEnt 4
4. INTRODUCTION 5
4. 1. gEnEraL PUrPosE 5
4. 2. modbUs ProtocoL 5
4. 3. data dEcoding 5
5. INSTALLATION OF MODBUS RTU CARD 6
5. 1. ‘com-sLots’ LocaLisation 6
5. 2. modbUs sEriaL intErfacE PLUg in 6
5. 3. modbUs intErfacE in ParaLLEL sYstEm configUration 6
5. 4. connEctions and wiring 7
5. 5. com2 sEriaL Link dEfaULt sEttings 8
5. 6. How to cHangE tHE “sEriaL Link 2” sEttings ? 8
6. INSTALLATION OF MODBUS TCP CARD 9
6. 1. ‘com-sLots’ LocaLisation 9
6. 2. UPs com2 modbUs sEriaL Link dEfaULt sEttings 9
6. 3. dEfaULt sEttings of tHE modbUs tcP intErfacE 10
6. 4. framE Errors managEmEnt 11
7. CONVENTIONS 11
8. MODBUS IN SINGLE UPS UNIT
12
8. 1. How to rEad data 12
8. 2. incoming data strUctUrE 12
8. 3. UPs idEntification 13
8. 4. datE & HoUrs 13
8. 5. UPs configUration 13
8. 6. Unit statUs 14
8. 7. Unit aLarms 16
8. 8. Unit mEasUrEmEnts tabLEs 18
8. 9. Unit EnabLEd controLs tabLE 20
8. 10. controLs sEnd to UPs 20
INDEX
2
Delphys green power - Ref.:
IOMDGPJB0910-GB_11
To Next Page
Loading...
