Need help?Do you have a question about the socomec MODULYS GP 25 kVA and is the answer not in the manual?
Explains the meaning of various safety symbols used in the manual.
Specifies the conditions and room requirements for installing the UPS unit.
Provides instructions and warnings for the safe physical movement and manipulation of the UPS.
Details the procedure for securely fixing the unit to the floor.
Outlines necessary electrical specifications, protection devices, and cable sizing for installation.
Explains how to prevent dangerous voltage backfeed into the auxiliary mains supply.
Provides guidelines and diagrams for the correct routing and separation of power and control cables.
Instructions for installing an anti-intrusion kit for securing cables during floor mounting.
Illustrates the wiring for connecting main and auxiliary power sources independently.
Shows the wiring diagram for a unified connection of main and auxiliary power supplies.
Details the procedure and safety precautions for connecting external battery cabinets to the UPS.
Covers electrical diagrams for power and bypass modules, and other connection types.
Step-by-step guide for inserting power modules into the UPS cabinet.
Step-by-step guide for safely removing power modules from the UPS cabinet.
Procedure for replacing the bypass module, including safety warnings.
Instructions on how to connect battery modules, including weight and placement guidelines.
Step-by-step guide for replacing battery modules within the UPS.
Instructions for safely removing the UPS control panel from its housing.
Details the function of the UPS display screen and its control buttons.
Explains the status bar, alert area, message area, and unit status indicators on the display.
Presents the hierarchical structure of the UPS menu, detailing navigation paths for various functions.
Describes keypad locking, password entry, and the functions of the Alarms, Measurements, and Commands menus.
Details configuration options, battery settings, event logs, and service functions.
Step-by-step guide for updating the UPS language through a USB memory stick.
Detailed steps for powering up the UPS system and initiating its operation.
Procedure for safely shutting down the UPS and disconnecting the load.
Instructions for switching the UPS into maintenance bypass mode for servicing.
Guidelines for deactivating the UPS for extended periods and maintaining battery health.
Procedures for immediate UPS power interruption and remote shutdown commands.
Explains the ONLINE double conversion mode and its different operating sub-modes.
Describes the ECO MODE for increased energy efficiency, with associated stability trade-offs.
Details the converter mode, which provides a stabilized output voltage independent of input frequency.
Explains how to use the maintenance bypass for system servicing without interrupting load power.
Instructions for operating the UPS in conjunction with a generator for enhanced power support.
Information on the ADC card for configurable outputs and digital inputs, and generator connection.
Details on connecting external sensors and devices via the ADC card's ports.
Describes the NET VISION card for network communication, remote management, and shutdown.
Guidelines for battery inspection, replacement with recommended types, and safe disposal.
Recommended replacement intervals for consumable parts like fans and capacitors.
Explains the meaning of various safety symbols used in the manual.
Specifies the conditions and room requirements for installing the UPS unit.
Provides instructions and warnings for the safe physical movement and manipulation of the UPS.
Details the procedure for securely fixing the unit to the floor.
Outlines necessary electrical specifications, protection devices, and cable sizing for installation.
Explains how to prevent dangerous voltage backfeed into the auxiliary mains supply.
Provides guidelines and diagrams for the correct routing and separation of power and control cables.
Instructions for installing an anti-intrusion kit for securing cables during floor mounting.
Illustrates the wiring for connecting main and auxiliary power sources independently.
Shows the wiring diagram for a unified connection of main and auxiliary power supplies.
Details the procedure and safety precautions for connecting external battery cabinets to the UPS.
Covers electrical diagrams for power and bypass modules, and other connection types.
Step-by-step guide for inserting power modules into the UPS cabinet.
Step-by-step guide for safely removing power modules from the UPS cabinet.
Procedure for replacing the bypass module, including safety warnings.
Instructions on how to connect battery modules, including weight and placement guidelines.
Step-by-step guide for replacing battery modules within the UPS.
Instructions for safely removing the UPS control panel from its housing.
Details the function of the UPS display screen and its control buttons.
Explains the status bar, alert area, message area, and unit status indicators on the display.
Presents the hierarchical structure of the UPS menu, detailing navigation paths for various functions.
Describes keypad locking, password entry, and the functions of the Alarms, Measurements, and Commands menus.
Details configuration options, battery settings, event logs, and service functions.
Step-by-step guide for updating the UPS language through a USB memory stick.
Detailed steps for powering up the UPS system and initiating its operation.
Procedure for safely shutting down the UPS and disconnecting the load.
Instructions for switching the UPS into maintenance bypass mode for servicing.
Guidelines for deactivating the UPS for extended periods and maintaining battery health.
Procedures for immediate UPS power interruption and remote shutdown commands.
Explains the ONLINE double conversion mode and its different operating sub-modes.
Describes the ECO MODE for increased energy efficiency, with associated stability trade-offs.
Details the converter mode, which provides a stabilized output voltage independent of input frequency.
Explains how to use the maintenance bypass for system servicing without interrupting load power.
Instructions for operating the UPS in conjunction with a generator for enhanced power support.
Information on the ADC card for configurable outputs and digital inputs, and generator connection.
Details on connecting external sensors and devices via the ADC card's ports.
Describes the NET VISION card for network communication, remote management, and shutdown.
Guidelines for battery inspection, replacement with recommended types, and safe disposal.
Recommended replacement intervals for consumable parts like fans and capacitors.
To Next Page
General