EasyManua.ls Logo

socomec MASTERYS IP+ User Manual

socomec MASTERYS IP+
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION AND OPERATING MANUAL
MASTERYS IP+
40-60 kVA 3/1
Question and Answer IconNeed help?

Do you have a question about the socomec MASTERYS IP+ and is the answer not in the manual?

socomec MASTERYS IP+ Specifications

General IconGeneral
Product TypeUPS
Frequency50/60 Hz
TopologyDouble Conversion Online
Output Frequency50/60 Hz
EfficiencyUp to 96%
Battery TypeVRLA
Communication InterfacesRS232, SNMP, Modbus
Protection featuresOverload, short circuit, over temperature, battery deep discharge
Operating temperature0 to +40 °C
Relative humidity0 to 95% non-condensing
Dimensions (W x H x D)Varies by model (e.g., 600 x 800 x 1200 mm for 20kVA model)
WeightVaries depending on power rating and configuration. Consult datasheet.
Input Voltage400 V (3Ph+N) / 415 V (3Ph+N)
Output Voltage400 V (3Ph+N) / 415 V (3Ph+N)

Summary

SAFETY INFORMATION

IMPORTANT SAFETY GUIDELINES

Crucial instructions for safe operation, movement, and connection of the UPS unit.

UNPACKING AND INSTALLATION

ELECTRICAL REQUIREMENTS AND CONNECTIONS

Details on input power, protection devices, and cable sizing for proper installation.

INSTALLATION PROCEDURES AND INSTRUCTIONS

Step-by-step instructions and warnings for installing the UPS unit and making power connections.

MODES OF OPERATION

ON LINE OPERATIONS

Explanation of the standard "ON LINE" double conversion mode and its sub-modes.

OPERATING PROCEDURES

START-UP AND SHUTDOWN PROCEDURES

Step-by-step procedures for starting up and shutting down the UPS in normal mode.

MANUAL BYPASS OPERATION

Procedures for switching onto and returning from the manual bypass.

EMERGENCY SHUTDOWN PROCEDURE

Instructions for performing an emergency shutdown of the UPS output.

MENUS AND SYSTEM MONITORING

ALARMS MENU

Displays active alarms and provides a code-based description of each alarm.

PROBLEM SOLVING AND MAINTENANCE

SYSTEM AND UPS ALARMS

Analysis and troubleshooting of system and UPS internal alarms.

TECHNICAL SPECIFICATIONS

PARALLEL 1+1 REDUNDANT CONFIGURATION

PARALLEL INSTALLATION AND CONNECTIONS

Recommendations for installing and connecting UPS units in a parallel 1+1 redundant configuration.

Related product manuals