socomec Masterys BC+ Series User Manual

INSTALLATION
AND OPERATING
MANUAL
www.socomec.com
MODBUS RTU / MODBUS TCP
for Modulys GP 2.0 range
ITYS PRO UPS range
Masterys GP4 UPS range
Masterys BC+ UPS range
EN

socomec Masterys BC+ Series Specifications

General

Frequency	50/60 Hz
Efficiency	Up to 96%
Humidity	0-95% non-condensing
Protection Degree	IP20
Topology	Double conversion on-line
Input Voltage	400 V
Output Voltage	400 V
Battery Type	VRLA
Communication	RS232, USB, SNMP
Operating Temperature	0-40 °C
Output Voltage Range	+/- 1%

Summary

3. MODBUS RTU – RS485 INTERFACE (ADC+SL card)

4. MODBUS TCP - IDA interface (MODBUS TCP card)

5. MODBUS UPS DATA ACCESS

5.1 Modbus generic table

Provides a generic table mapping Modbus addresses to UPS data.

6. MODBUS TABLE MODULYS GP

6.3 UPS configuration table, starting from 0x0001

6.4 Unit configuration table, starting from 0x1000

6.5 UPS reference table, starting from 0x0010

6.6 UPS status table, starting from 0x0030

6.6 UPS status table (continued) - Rectifier, Inverter, Bypass, Power Share

6.8 Module summary table, starting from 0x0036

6.9 UPS alarms table, starting from 0x0038

6.9 UPS alarms table (continued) - Bypass, Environment, Internal

6.11 Module alarms synthesis table, starting from 0x103E

6.12 UPS measurements table, starting from 0x0040

6.12 UPS measurements table (continued) - Bypass, Output Detail, Add. Input

6.13 Commands table, starting from 0x00C9

7. MODBUS TABLE ITYS PRO

7.1 UPS configuration table, starting from 0x0001

Lists configuration parameters for ITYS PRO UPS.

7.2 UPS reference table, starting from 0x0010

7.3 UPS status table, starting from 0x0030

7.3 UPS status table (continued) - Battery, DC Storage, Rectifier, Inverter, Bypass, Power Share

7.5 UPS alarms table, starting from 0x0038

7.5 UPS alarms table (continued) - Bypass, Environment, Internal

7.7 UPS MEASUREMENTS TABLE, starting from 0x0040

7.7 UPS MEASUREMENTS TABLE (continued) - Bypass, Output Detail, Add. Input

7.8 COMMANDS table, starting from 0x00C7

8. MODBUS TABLE MASTERYS BC+ & GP4

8.3 UPS configuration table, starting from 0x0001

8.4 UPS reference table, starting from 0x0010

8.5 UPS status table, starting from 0x0030 or 0x(u)030

8.5 UPS status table (continued) - Rectifier, Inverter, Bypass, Power Share

8.7 System summary table, starting from 0x0036

8.8 UPS alarms table, starting from 0x0038 or 0x(u)038

8.8 UPS alarms table (continued) - Bypass, Environment, Internal

8.10 Units alarms synthesis table, starting from 0x003E

8.11 UPS measurements table, starting from 0x0040 or 0x(u)040

8.11 UPS measurements table (continued) - Bypass, Output Detail, Add. Input

8.12 Commands table, starting from 0x00C9

9. MODBUS PROTOCOL

9.1 Functions used

Lists the Modbus functions used in the document (Read, Write).

9.2 Summary of frame format

9.3 Error code management