socomec Masterys BC+ Series User Manual

6 EN
MODBUS RTU / MODBUS TCP for Modulys GP 2.0 - ITYS PRO UPS - Masterys GP4 UPS - Masterys BC+ UPS range - Ref.: IOMXXXOPXX00-EN 00
2. GENERAL AIM
This document provides information on the MODBUS protocol serial link or Ethernet network for:
• MODULYS GP 2.0
• ITYS PRO
• MASTERYS BC+
• MASTERYS GP4
Before connecting monitoring equipment or a BMS system (building management system) to the UPS, it is necessary
to install and set up the serial interface or network configurations in the case of a network connection.

socomec Masterys BC+ Series Specifications

General

Frequency	50/60 Hz
Efficiency	Up to 96%
Humidity	0-95% non-condensing
Protection Degree	IP20
Topology	Double conversion on-line
Input Voltage	400 V
Output Voltage	400 V
Battery Type	VRLA
Communication	RS232, USB, SNMP
Operating Temperature	0-40 °C
Output Voltage Range	+/- 1%