To Next PageTo Next Page
Need help?Do you have a question about the socomec MASTERYS BC 60 kVA and is the answer not in the manual?
Crucial instructions for safe handling, installation, and operation of the MASTERYS BC UPS.
Explains the meaning of various symbols found on the UPS unit's labels.
Procedures and precautions for transporting and moving the UPS unit.
Specifies the recommended operating conditions for temperature, humidity, and altitude.
Details required electrical specifications, protection devices, and cable sizing.
Information on implementing protection against current backfeed.
Step-by-step instructions for the correct installation of the UPS.
Connecting auxiliary power, output, battery, and control cables to the UPS.
Procedures for routing, securing cables, and fixing the UPS unit.
Specific considerations for installing the UPS on raised floors in data centers.
Connecting generators and emergency shutdown systems to the UPS.
Overview of parallel connection benefits, installation, and power connection requirements.
Diagram illustrating the recommended setup for parallel UPS configurations.
Information on connecting control cables for parallel UPS systems.
Procedure for safely connecting external battery cabinets to the UPS.
Details on the ON LINE mode, including normal, bypass, and battery operation.
Explanation of the 'economy' mode for energy saving and its operational characteristics.
Using the manual bypass for maintenance without interrupting load power.
How to use an optional external manual bypass for maintenance tasks.
Locating and identifying control switches, connectors, and the mimic panel.
Detailed explanation of the function of each switch on the UPS.
Overview of the mimic panel's display sections and button operations.
Explanation of the status indicators provided by the LEDs on the mimic panel.
Interpretation of the coloured light bar indicating power supply status to the load.
Describes the menu structure for accessing UPS information and settings.
Lists and explains all available alarm codes and their descriptions.
Displays available measurements for UPS input, output, and battery status.
How to issue immediate and extended commands to the UPS.
Accessing and displaying UPS parameters such as serial number and software versions.
Used for configuration changes, warranty activation, and service code display.
Configuring UPS parameters like language, voltage, frequency, and restart modes.
Displays service codes for accurate fault diagnosis by the support service.
Procedure for entering the warranty activation code during initial setup.
Step-by-step guide for initiating the UPS in its standard operating mode.
Instructions for safely powering down the UPS and its associated charger.
Guidelines for periods of inactivity, including battery maintenance.
Procedure to switch the UPS to manual bypass for maintenance or failure scenarios.
Steps to revert the UPS from bypass or shutdown back to normal operation.
How to quickly interrupt the UPS power supply in urgent situations.
Explains the UPS's ability to manage various communication channels simultaneously.
Details the ADC card's capabilities for managing outputs and inputs with different modes.
Information about connecting and using a remote mimic panel.
Details on the NET VISION interface for network management and remote control.
Information on the PROFIBUS adapter for network integration.
Overview of software solutions for efficient power protection device management.
Categorizes and explains system alarms related to external and internal UPS circuits.
Lists specific UPS alarms and the recommended corrective actions.
Guidance on performing regular specialist maintenance for optimal UPS performance.
Information on battery condition, charging, and expected operational life.
Information on the lifespan of cooling fans and recommended replacement.
Details on capacitor types, expected life, and checks during maintenance.
Device for continuous transformer insulation checking and alarm display.
Device to isolate the UPS for maintenance without interrupting the load.
PCB for synchronizing UPS output with external power sources like generators.
Enables the use of an auxiliary energy source during primary mains failure.
Devices to protect against dangerous current backfeed on mains supplies.
Activating protection on mains and auxiliary supplies via mimic panel settings.
Activating UPS protection when only a primary mains supply is available.
Comprehensive technical data and specifications for the MASTERYS BC 60-80 kVA UPS.
General| Power Rating | 60 kVA |
|---|---|
| Frequency | 50/60 Hz |
| Operating Temperature | 0°C to 40°C |
| Input Voltage | 400 V |
| Output Voltage | 400 V |
| Battery Type | VRLA |
| Efficiency | Up to 96% |
| Communication | RS232, USB |
