Need help?Do you have a question about the socomec Modulys GP Green Power 2.0 Series and is the answer not in the manual?
General| Series | Modulys GP Green Power 2.0 |
|---|---|
| Type | Modular UPS |
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Relative Humidity | 0 to 95% non-condensing |
| Protection Rating | IP20 |
| Modular Design | Yes |
| Topology | Double conversion online |
| Input Voltage | 400 V |
| Efficiency | Up to 96% |
| Battery Type | Li-ion or Lead-acid |
| Typical Backup Time | Varies with load |
| Communication Interfaces | RS232, USB, Ethernet, SNMP |
| Display | LCD display |
| Operating Temperature | 0 to 40 °C |
| Cooling | Forced air |
| Standards Compliance | IEC 62040-1, IEC 62040-2, IEC 62040-3 |
| Parallel Operation | Yes, up to 8 units in parallel |
| Output Voltage | 400 V (3Ph+N) |
Essential guidelines for safe installation and operation of UPS and batteries.
Explains various safety symbols used throughout the manual.
Provides instructions and warnings for safely handling the heavy UPS unit.
Details electrical specifications and protection devices for UPS installation.
Step-by-step guide for connecting external battery cabinets to the UPS.
Outlines the structure and available items within the UPS menu system.
Step-by-step guide to power on the UPS unit safely.
Procedure for safely shutting down the UPS and its load.
Explains the three operating modes: Inverter, Bypass, and Battery.
Explains the features and functions of the ADC+SL communication card.
Guidelines for battery maintenance, replacement, and disposal.
To Next Page