To Next Page
A
Anna ClarkeAug 3, 2025
What to do if my socomec ITYS PRO 10 is overloaded?
- RRaymond WhiteAug 3, 2025
If your Socomec UPS is overloaded, immediately reduce the load.
What to do if my socomec ITYS PRO 10 is overloaded?
If your Socomec UPS is overloaded, immediately reduce the load.
What should I do if the rectifier input supply is not ok in my socomec ITYS PRO 10?
If the rectifier input supply is not okay, verify that the input voltage and frequency are within the UPS ratings.
What should I do if the bypass input supply is not ok in my socomec ITYS PRO 10?
If the bypass input supply is not okay, verify that the input voltage and frequency are within the UPS ratings.
What to do if I get an Option Board Alarm on my socomec ITYS PRO 10?
If the option board alarm is triggered, check that the board is properly inserted.
What to do if there is a wrong configuration in socomec ITYS PRO 10?
If there is a wrong configuration, please check the configurations or contact Service.
Explains the meaning of various safety symbols used in the manual.
Specifies the conditions for installing and operating the UPS unit.
Provides instructions for safely moving and positioning the UPS.
Details the electrical specifications and standards for installation.
Details wiring for separate and common mains connections in 3/3 models.
Details wiring for separate mains connections in 3/1 models.
Details wiring for common mains connections in 3/3 models.
Explains the status bar and mimic panel displays on the UPS.
How to switch onto and from maintenance bypass for operations.
Explains the economy mode for energy saving and its implications.
Information on using the UPS as a frequency converter.
General| Model | ITYS PRO 10 |
|---|---|
| Power Rating | 10 kVA |
| Output Power | 9 kW |
| Frequency | 50/60 Hz |
| Topology | Online double conversion |
| Form factor | Tower |
| Communication | RS232, USB, SNMP (optional) |
| Operating Temperature | 0°C to 40°C |
| Battery Type | Valve regulated lead acid (VRLA) |
