Need help?Do you have a question about the Soehnle 2761 and is the answer not in the manual?
Loading the value which is in the secondary display or has been entered manually.
Press the "i" command key and the number of the memory where the value you want is stored.
Press the "CI" command key. Then enter the number of the memory you want to clear.
Enter the value for the set point with the numeric keyboard and confirm entry.
Tare the container and place items on the scale for weighing with set points.
Enter tolerance weights and place items on scale to check against limits.
Tare the empty container and place items to calculate average weight per item.
Determine, recall, or manually enter the reference weight and place items on the scale.
Perform counting operations when the tare weight is unknown or known.
To Next Page
General