SOFAR 3.3~12KTLX-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
Figure 4-11 DC cable connection（1）
Step 2: Crimp the PV metal contact pin to the striped cable using a proper
crimping pliers;
Figure 4-12 DC cable connection(2)
Step 3: Insert wire into the connector cap nut and assemble into the back of
male or female plug, When you heard a “click”, the pin tact assembly is seated
correctly. (3. Positive Connector, 4. negative connector);
Figure 4-13 DC cable connection(3)
Step 4: Measure PV voltage of DC input with multimeter, verify DC input cable
polar and connect DC connector with inverter until hearing a slight sound
indicated connection succeed.
To Next Page
Loading...
