Need help?Do you have a question about the Sofar solar SOFAR 11KTLX-G3-A and is the answer not in the manual?
General| Model | SOFAR 11KTLX-G3-A |
|---|---|
| Rated Output Power | 11000 W |
| Max. DC Power | 16500 W |
| Max. DC Input Power | 16500 W |
| Max. DC Voltage | 1100 V |
| Start Voltage | 200 V |
| Number of MPPT | 2 |
| Number of DC Inputs per MPPT | 2 |
| Max. AC Power | 12100 VA |
| Max. AC Current | 16 A |
| Grid Frequency | 50 / 60 Hz |
| Total Harmonic Distortion (THDi) | <3% |
| DC Switch | Yes |
| Protection Class | IP65 |
| Operating Temperature Range | -25°C to +60°C |
| Operating Temperature | -25°C to +60°C |
| Cooling | Natural convection |
| Cooling Method | Natural convection |
| Type | Grid-tied Inverter |
| Input Voltage Range | 200-1000 V |
| MPPT Voltage Range | 200-1000 V |
| Rated AC Voltage | 400 V |
| AC Voltage Range | 180 - 280 V |
| Power Factor | 0.8 leading to 0.8 lagging |
| Communication | RS485 |
Provides essential safety guidelines for installation and operation.
Outlines legal and regulatory requirements for inverter installation and upkeep.
Details the procedure for connecting the inverter's grounding electrode.
Explains how to connect the inverter to the utility grid via AC power cable.
Provides instructions for connecting the PV array to the inverter's DC input.
Checks AC and DC voltage, and connection integrity before startup.
Guides on turning on the DC and AC switches to start the inverter operation.
Provides steps for upgrading the inverter's firmware via a USB flash drive.
Lists potential errors, their causes, and resolution steps for troubleshooting.
Details the DC input parameters including voltage, current, and power ratings.
Details the AC output parameters including rated power, voltage, and current.
To Next Page