Sofar solar SOFAR 11KTLX-G3-A - Determining the Installation Position

SOFAR 3.3~12KTLX-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
- 17 -
4
Wire Stripper
Used to peel cable
5
M6 hexagon wrench
M6 use to uninstall and install the front
top cover and down cover
6
Crimping Tool
Use to crimp cable on grid side, load
side and CT extensive cable
7
Multimeter
Check grounding cable, PV positive and
negative pole
8
Marker
Mark signs
9
Measuring Tape
Measure distance
10
Level
Ensure the rear panel is properly
installed
11
ESD gloves
Installer wear when installing product
12
Safety goggles
Installer wear when installing product
13
Mask
Installer wear when installing product
3.4. Determining the Installation Position
Select an appropriate location to install the product to make sure the inverter
can work in a high efficiency condition. When selecting a location for the