Sofarsolar HYD 15KTL-3PH - Page 101

OPERATION OF THE DEVICE
HYD 5K...20KTL-3PH 101
“Advanced Settings” menu
In this menu you can do advanced settings.
1. Battery Parameter
Set the battery parameters for
Battery 1 and Battery 2. Depending
on the selected Battery Type, more
settings can be adjusted. See
details below.
Battery Capacity (kWh)
Set the capacity of connected
battery
Battery address
(only for batteries with integrated
BMS)
Up to 4 battery addresses for each
Battery Input Channel can be set.
This is the CAN bus or Modbus ID
of each battery stack connected to
the Battery Input, depending on the
bus type between inverter and the
BMS.
Nominal Battery Voltage (V)
Nominal DC voltage of the battery
Battery Cell Type
(for inverter-integrated BMS)
Max. charging current (A)
Max. allowed charging current for
the battery
Max. discharging current (A)
Max. allowed discharging current
for the battery
Discharge Depth (%)
Max. allowed discharge depth
(DOD) for the battery. DOD of 80%
means, a battery with 10 kWh