How to fix OverTempDerating error on Sofarsolar SOFAR 7KTLM-G3?
The OverTempDerating error may occur if the inverter is overheating. To fix this: * Ensure the inverter is installed where there is no direct sunlight. * Make sure the inverter is in a cool and well-ventilated place. * Confirm the inverter is installed vertically. * Verify the ambient temperature is below the inverter's temperature limit.
What does PermRelayFail mean on my Sofarsolar SOFAR 7KTLM-G3 and how to fix it?
A PermRelayFail error indicates internal faults within the inverter. To attempt a fix, switch OFF the inverter, wait for 5 minutes, then switch it back ON. If the problem continues, please contact technical support.
What does IsoFault mean on Sofarsolar SOFAR 7KTLM-G3 Inverter and how to solve it?
The IsoFault error indicates an insulation fault. Check the insulation resistance between the photovoltaic array and ground. If there is a short circuit, repair the fault.
What to do if Sofarsolar Inverter shows GridOVP error?
If the GridOVP alarm occurs occasionally, it might be due to an occasional abnormality in the electric grid. The inverter should automatically return to normal operation once the grid stabilizes. If the alarm occurs frequently, verify that the grid voltage and frequency are within the acceptable range. If they are, inspect the AC circuit breaker and AC wiring of the inverter. If the grid voltage and frequency are not within the acceptable range and the AC wiring is correct, contact technical support to adjust the grid protection settings after getting approval from your local electrical grid operator.
What to do if my Sofarsolar SOFAR 7KTLM-G3 displays a GFCI error?
If your Sofarsolar Inverter displays a GFCI error, switch the inverter OFF, wait for 5 minutes, and then switch it back ON. If the problem persists, it indicates internal faults, please contact technical support.
Why is my Sofarsolar SOFAR 7KTLM-G3 Inverter showing a TempErrBat error?
The TempErrBat error might appear if the ambient temperature is too high. To resolve this, ensure that the inverter is installed: * where there is no direct sunlight. * in a cool, well-ventilated place. * vertically. Also, make sure the ambient temperature is below the inverter's specified temperature limit.
What causes PEConnectFault on Sofarsolar SOFAR 7KTLM-G3 Inverter?
The PEConnectFault error indicates a grounding issue. Check the AC output PE wire to ensure it is properly grounded.
General| Brand | Sofarsolar |
|---|---|
| Model | SOFAR 7KTLM-G3 |
| Category | Inverter |
| Language | English |
To Next Page