Sofarsolar SOFAR 7KTLM-G3 - Main Interface

SOFAR 7K~10.5KTLM-G3 User manual
Copyright © Shenzhen SOFAR SOLAR Co., Ltd
- 42 -
6.3. Main Interface
Long press the “∨”button under standard interface to enter into main interface,
including:
Normal
------Long press the“∨”
1.Enter Setting
2.Event List
3.SystemInfo
4.System Time
5.Software Update
(A) “Enter Setting” Interface as below:
1.Enter Setting
------Long press the
“∨”
1.Set Time
9.Set Language
2.Clear Energy
10.SetAntiReflux
3.Clear Events
11.LogicInterfac
4.Set Country
12.IV Curve Scan
5.On-Off Control
13.PCC Select
6.Set Energy
14.Autotest Fast
7.Set Address
15.Autotest STD
8.Set Inputmode
Long press the “∨” button to Enter the main interface of "1.Enter Setting" and
long press the “∨” to enter the setting menu. You can switch up and down to
choose what you want by short pressing the “∧” and “∨” .
Note1: Some settings need to enter the password (the default password is 0001) ,
when entering the password, short press the “∧” and “∨” to change the number,
long press the “∨” to confirm the current number, and long press the“∨” after
entering the correct password. If "password error, try again" appears, you will
need to re-enter the correct password.
1. Set Time
Set the system time for the inverter.
2. Clear Energy
Clean the inverter of the total power generation.
3. Clear Events