Sofarsolar SOFAR 7KTLM-G3 - Update Software Online

SOFAR 7K~10.5KTLM-G3 User manual
Copyright © Shenzhen SOFAR SOLAR Co., Ltd
- 47 -
2. Event List
1. Current Events
2. History Events
Fault information
001 ID04 06150825
( Display the event sequence number, event ID
number, and event occurrence time )
(C) “SystemInfo” Interface as below
3.SystemInfo
------Long press the
“∨”
1.Inverter Type
10.Remote State
2.Serial Number
11.Reflux Enable
3.GeneralSoftVer
12.Reflux Power
4.HardVersion
13.DRMs0
5.Country
14.DRMn
6.SafetySwVer
15.MPPT Scan
7.SafetyHardVer
16.ForceControl
8.Modbus Address
17.PCC Select
9.Input mode
The user enters the main menu by long pressing the “∨” button, then long press
the “∨” button to enter "3. SystemInfo". Turning the page down can select the
system information to view.
(D) system Time
Long press the “∨” button and short press the button to turn the page in the
standard user interface to enter into “4.Display Time”,then long press the “∨”
button to display the current system time.
(E) Software Update
User can update software by USB flash drive , SOFARSOLAR will provide the
new update software called firmware for user if it is necessary, The user needs to
copy the upgrade file to the USB flash drive.
6.4. Update Software online
SOFAR 7K~10.5KTLM-G3 inverters offer software upgrade via USB flash
drive to maximize inverter performance and avoid inverter operation error