SOFAR 7K~10.5KTLM-G3 User manual
Copyright © Shenzhen SOFAR SOLAR Co., Ltd
caused by software bugs.
Step 1 Insert the USB flash drive into the compute.
Step 2 SOFARSOLAR will send the Software code to the user who needs to
update. After user receive the file,please decompressing file and cover the
original file in USB flash drive.
Step 3 Insert the USB flash drive into the USB/WiFi interface.
Step 4
Step 5 If the following errors occur, please upgrade again.If this continues many
times, contact technical support for help.
Step 6 After the update is completed,turn off the DC breaker, wait for the LCD
screen extinguish, then restore the WiFi connection and then turn on the DC
breaker and AC breaker again,the inverter will enters the running state. User can
check the current software version in Systemlnfo>>SoftVersion.
To Next Page
Loading...
