BASIC SAFETY INFORMATION
14 HYD 5K...20KTL-3PH
2.2.1 Symbols on the inverter
Several symbols pertaining to safety can be found on the inverter.
Please read and understand the content of these symbols before
starting the installation.
Residual voltage is present in the inverter! Before
opening the inverter, you should wait five minutes to
ensure that the capacitor has been fully discharged.
Caution! Danger through electric shock
The product is compliant with EU guidelines
Please read the manual before installing the inverter
Device degree of protection according to EN 60529
Positive and negative poles of the DC input voltage
The inverter must always be transported and stored
with the arrows pointing upward
RCM (Regulatory Compliance Mark)
The product meets the requirements of the applicable
Australian standards.
To Next Page
Loading...
