ELECTRICAL CONNECTIONS
HYD 5K...20KTL-3PH 81
Configuration steps
1. After starting the app, register as a new user or enter the current
solarMAN access data.
2. Create a new system and save the system data.
3. Scan the barcode of the stick logger to assign an inverter to the
system.
4. Go to the newly created system in order to configure the stick
logger (device/logger)
5. Press the button on the WiFi stick for 1 second to activate the
WPS mode of the stick so that the smartphone can be connected
to the WiFi stick.
6. Now, select your local WiFi network for Internet access and enter
your WiFi password.
7. The WiFi stick is configured with the access data.
WiFi stick status
The LEDs on the WiFi stick provide information regarding the status:
To Next Page
Loading...
