Sofarsolar SOFAR 3000TL-G3 - Installation Guide; Important Installation Notes; Installation Process Overview; Pre-Installation Checks

SOFAR 1.1K~3.3KTL-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
- 11 -
3. Installation
Outlines of this chapter
This topic describes how to install the SOFAR 1.1K~3.3KTL-G3 .
Installation notes
3.1. Installation Process
Figure3-1 Installation flowchart
3.2. Checking Before Installation
Checking Outer Packing Materials
Do NOT install the SOFAR 1.1K~3.3KTL-G3 on flammable
material.
Do NOT install the SOFAR 1.1K~3.3KTL-G3 in an area used to
store Flammable or explosive material.
Danger
The enclosure and heat sink are very hot while the inverter is
working, therefore do NOT install the SOFAR 1.1K~3.3KTL-G3 in
places where you might touch them inadvertently.
Caution
Consider the weight of SOFAR 1.1K~3.3KTL-G3 when
transporting and moving the inverters.
Choose an appropriate mounting position and surface.
Assign at least two persons to install the inverter.
Attention
Start
Check before
installation
Prepare installation
tools
Determine
installation location
Moving the
inverter
Install the rear
panel
Install the
inverter
End