Specifications
Emitter: a Cree XHP70.3 HI led with a lifespan of 50,000 hours
Operating voltage: 3V – 4.2V
Battery options: 1 x 21700 rechargeable lithium-ion battery
Dimension: 131 mm × 32 mm
Weight: 110 grams (without battery)
Flashlight body: AL6061-T6 aluminum alloy.
Toughened mineral glass lens
Orange peel reflector
Tail e-switch
Boost driver
Water resistance i.a.w. IP68
Mode Memory: memorizes the last brightness level used in the general modes
(Eco/Low/Medium/High).
Charging specification: 5V/2A
Reverse polarity protection from improper battery installation.
Low voltage warning: When the battery voltage is lower than 3.2V, the LED
indicator will start to flash red. Please recharge the flashlight or insert a new
battery.
Low voltage protection: It turns off automatically if the voltage gets too low.
Please recharge the battery or insert new batteries.
Advanced Temperature Regulation (ATR) technology: When the flashlight is
turned on for a certain period of time, the temperature will drop.
Battery Specifications
Rechargeable lithium-ion battery
The above mentioned parameters are based on tests according to international flashlight testing
standards (ANSI/NEMA FL1) using one 5,000mAh 21700 Li-ion battery in our laboratory.
Results may vary with different battery or under different environmental conditions.
To Next Page
Loading...
