Sofirn SF16 User Manual

Sofirn SF16 Manual
Thank you for purchasing this Sofirn product.
send email to sofirnlight@gmail.com
if you meet any issues.
The Sofirn SF16 is a UV flashlight designed for seeing and observing things that are
normally invisible. There are 3 different output levels for you to choose from:
Low→Medium→High. Powerful enough to deliver a maximum output of 875mw
light, helping you inspect the pet urine stains in seconds and no more cleaning the
carpets blindly. A good family guardian, taking care of the cleanliness and your
health.
ANSI/NEMA FL1 Chart
Modes
Low
Medium
High
Optical Power
126mw
440mw
875mw
Runtime
31h
14.5h
8h
WATER
RESISTANCE
IPX-8 (not for diving)
NOTE
The above mentioned parameters are based on tests according to
international flashlight testing standards using one 18650 battery. Results
may vary with different battery or under different environmental
conditions.

Sofirn SF16 Specifications

General

Water Resistance	IPX8
Color Temperature	5000K
Switch Type	Tail switch
Impact Resistance	1 meter
Head Diameter	25mm
Body Diameter	25mm
Finish	Type III hard anodized

Summary

ANSI/NEMA FL1 Chart

Specifications

Safety Instructions

Battery Option

Battery Installation

Battery Level Indicator

Light Indicator When Charging

General Operation

ON/OFF

Single click tail switch to turn SF16 on/off. Enters last used mode.

Output Selection

Tap tail switch to cycle through Low, Medium, High output levels.

Troubleshooting and Maintenance