SE2500H SE3000 SE4000H SE5000H SE6000H SE8000H SE10000H Units
INPUT
Maximum DC Power 3875 4650 6200 7750 9300 12400 15500 W
Transformer-less, Ungrounded Yes
Maximum Input Voltage 480 Vdc
Nominal DC Input Voltage 380 400 Vdc
Maximum Input Current 7.5 9 11.5 13.5 16.5 20.5 26 Adc
Maximum back-feed current 0 Adc
Reverse-Polarity Protection Yes
Ground-Fault Isolation Detection 600kΩ Sensitivity
Overvoltage category II
Maximum Inverter Efficiency 99.2 %
European Weighted Efficiency 98.3 98.8 99 %
Nighttime Power Consumption < 2.5 W
ADDITIONAL FEATURES
Supported Communication Interfaces
RS485, Ethernet, ZigBee (optional), Wi-Fi (Built-in; antenna
included), Cellular (Optional)
Smart Energy Management Export Limitation
Arc Fault Protection Integrated, User Configurable (According to UL1699B)
Inverter Commissioning
with the SetApp mobile application using built-in Wi-Fi Access-Point
for local connection
STANDARD COMPLIANCE
Safety IEC-62109, AS/NZ3100
Grid Connection Standards AS/NZ4777:2015
Emissions
IEC61000-6-2, IEC61000-6-3, IEC61000-3-11, IEC61000-3-12, FCC
part15 class B
RoHS Yes
2
Single Phase Inverters with HD-Wave
Technology
Specifications
(Australia)
MAN-01-00538-1.0
To Next Page
Loading...
