EasyManua.ls Logo

SolarPower24 SP24 - Page 29

Default Icon
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
Solarpower24.it by Barba S.r.l. – via Locchi, 3F – 47122-Forlì – Italia
Tel/What’s up +39 05431995799 – web www.solarpower24.it – email solarpower24@solarpower24.it
30A
The setting range is from 30 A to
150 A. Increment of each click is
10A.
If discharging current is higher
than setting value, battery will
stop discharging. At this time, if
the utility is available, the inverter
will operate in bypass mode. If no
utility is available, the inverter will
shut down after 5-minute
operation in battery mode.
51
On/Off control for RGB LED
*It’s necessary to enable
this setting to activate RGB
LED lighting function.
Enabled (default)
Disable
52 Brightness of RGB LED
Low
Normal (default)
High
53 Lighting speed of RGB LED
Low
Normal (default)
High