Need help?Do you have a question about the SolaStat AlphaStat-Plus and is the answer not in the manual?
Explains the fundamental working principle of the AlphaStat-Plus controller and its basic function.
Summarizes special features like Demand, Bio-Safe, Away mode, and sensor diagnostics for efficient operation.
Section for recording installer details, contact information, and address after setup.
Essential safety rules for installing and operating the AlphaStat-Plus controller.
Important considerations and warnings for safely mounting and connecting the device.
Critical warnings and best practices for electrical connections and handling.
Specific advice and warnings regarding permanent wiring installations for the unit.
Guidance on selecting an appropriate and safe location for the AlphaStat-Plus unit.
Detailed instructions on how to physically attach the AlphaStat-Plus enclosure to a surface.
Emphasizes the importance of correct sensor placement for system efficiency and safety.
Illustrates the basic connection of the AlphaStat-Plus with a SolaStat-Rly for HWC control.
Shows the wiring diagram for a fixed installation of the AlphaStat-Plus.
Steps to verify correct operation and display indicators after connecting power.
Provides observations and disclaimers regarding the BioSafe mode and waterborne bacteria.
Guidelines for safely lengthening the sensor wire while avoiding interference.
Step-by-step instructions for safely replacing a faulty AlphaStat-Plus sensor.
Advises referring to local standards and using qualified plumbers for all plumbing work.
Highlights that hot water systems require professional plumbing and rated parts.
General| Frequency Range | 50/60 Hz |
|---|---|
| Certifications | CE, RoHS |
| Efficiency | 85% |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +70°C |
| Humidity | 0% to 95% non-condensing |
| Protection | Short circuit, over voltage |
| Weight | 500 g |
To Next Page