Solax Mobie Owner’s Manual V1.0 Page 32
Brake Release (Freewheel)
The Mobie is equipped with a “Release Brake” feature that enables you to put the
Mobie in freewheel mode. This mode removes the brake function and allows you to
easily push the Mobie. This may be helpful if you run out of battery power.
Note: When the “Release Brake” is enabled, the all control panel functions are disabled.
Using the Release Brake Feature:
• To enable the “Release Brake” feature, switch the release brake button to on as
show below
Installing and Adjusting the Optional Armrest
The armrests are optional and can be purchased through a Solax Mobility dealer. If you have
an armrest, you can adjust both the width of the armrest as well as the position.
Installing the Armrests
Please review the installation instructions that are provided with the optional armrest. You
can also view an online instructional tutorial at www.solax,obility.com
V. Operating your Mobie
To Next Page
Loading...