1
1 Safety
The Meter is well designed and tested to meet applicable state and international safety
standards. As an electrical and electronic equipment, safety precautions must be observed
and followed during the installation and electric connection to reduce the risk of personal
injury and device damage.
Before installing the device, carefully read, fully understand and strictly follow the detailed
instruction of the
User Manual
and other related regulations. The safety instructions in this
document are only supplements to local laws and regulations.
SolaX shall not be liable for any consequences caused by the violation of the installation,
and operation regulations specified in this document, including, but not limited to:
• Device damage due to force majeure, such as earthquake, flooding,
thunderstorm, lighting, fire hazard, volcanic eruption and overvoltage
• Device damage due to human causes
• Failure to follow the operation instructions and safety precautions on the product
and in this document
• Installation and use under improper environment or electrical condition
• Unauthorized modifications to the product or software
• Use of incompatible inverters or devices
To Next Page
Loading...