- 3 -
1 Product Overview
1.1 Product Introduction
The single phase AC charger is used for electric vehicle’s AC charging, with the function of charging by
scanning the RFID card. The RFID card is a key component to start or stop the charging session. The LED
indicator on the front panel helps you understand what is happening with the charger by indicating different
colors. The protection grade of the charger is high as IP65, with the excellent capacity of water and rust proof,
assuring the safe outdoor operation and maintenance. The floor-stand installation is optional by ordering an
additional pillar. Designed according to Electric Vehicle Charging System Standard EN 61851-1: 2011 and
EN 61851-22: 2002, the charger is compliant with the industrial standards and safe for usage. With internet
connection through WiFi users are able to monitor and manage the charger operation from the mobile APP.
1.2 Schematic Diagram
To Next Page
Loading...