SolaX Power X1-AE-7.0 - Operation Instruction; Product Installation

- 8 -
2 Operation Instruction
2.1 Product Installation
2.1.1 Package Verification
Unpack to check and verify following items after receiving the charger:
 Visual inspection on external appearance. In case there is any broken or damage, notify the seller
immediately.
 Check accessory type and quantity. If there is quantity in short or type inconformity, make the record in
time and contact the seller at once.
2.1.2 Installation Preparation
1) Tools
Tool Name
Photo
Function
Multimeter
Check electrical connection and
electrical parameter
Cross Screwdriver
(PH2x150mm, PH3x250mm)
Tight the screws
Insulated Torque Wrench
Tight the bolts
Electric drill
Hole on the wall
Diagonal Pliers
Cut cables
2) Cables & Materials