SolaX Power X3-MIC G2 Series Quick Installation Guide

X3-MIC G2 Series 3 kW-15 kW
PV Connection
- Align the PV connectors.
cable size: 4 mm
strip length
Inverter X 1
AC connector X 1
Self tapping screw X 3
Documents
LAN dongle(Optional)
WiFi dongle X 1
Expansion bolt X 3
Waterproof connector
with RJ45 X 1
Packing List
Inverter Installation
- Unscrew the bracket from the back of
the inverter.
- Screw the self-tappingscrews. - Match the inverter with the bracket.
- Screw the cross recessed screw on the
right side.
- Insert the expansion bolts.
positive DC
pin contact
male plug
negative DC
pin contact
clamp contact
nut
female plug
tighten nut
cable
Inverter
PV array
PV1
PV2
+
-
+
-
+
-
+
-
+
-
Note!
The PV connection mode in this box
is not allowed!
×
Note: Please refer to the appropriate instruction manual for the
usage of WiFi and LAN dongle.
(torque:1.2±0.1 N·m)
Meter (Optional)
DC pin contact X 4/6
Earth terminal X 1
X1
- And mark the position(223 mm*30 mm)
of three holes.
6
DC connector X 4/6
Round washer X 3
223
30
- Drill holes with φ10 drill.
- Depth: at least 60 mm.
torque: 0.8±0.1 N·m
X1
7 mm
cable
clamp contact
nut
tighten nut
2*positive, 2*negative for 3 kW-8 kW and 10 kW(input A: one string)
3*positive, 3*negative for 12 kW-15 kW and 10 kW(input A: two strings)

SolaX Power X3-MIC G2 Series Specifications

General

Brand	SolaX Power
Model	X3-MIC G2 Series
Category	Inverter
Language	English