What does PV_Above_Bus mean on my SolaX Power Inverter and how to fix it?
If your SolaX Power Inverter displays a PV_Above_Bus error, try to restart the inverter. If the issue persists, contact the installer.
What should I do if my SolaX Power X3-Forth Inverter displays PV_VolHigh?
If your SolaX Power Inverter shows a PV_VolHigh error, start by checking the PV voltage to ensure it's within the allowable range. If it is too high, reduce the number of PV modules in series to lower the PV voltage. If the problem persists, contact the installer.
What to do if SolaX Power X3-Forth Inverter displays GridVol_OP1 error?
If your SolaX Power Inverter shows a GridVol_OP1 error, check whether the grid voltage is within the allowable range. Then, try to re run the inverter.
What does GridVol_UP1 mean on my SolaX Power X3-Forth and how to fix it?
If your SolaX Power Inverter displays a GridVol_UP1 error, verify that the grid voltage is within the allowable range. If it is, try restarting the inverter.
What does GridFreq_OP1 mean on my SolaX Power X3-Forth and how to fix it?
If your SolaX Power Inverter displays a GridFreq_OP1 error, check if the power grid frequency is within the allowable range. If it is, try restarting the inverter.
What does DCBus_HW_OVP mean on my SolaX Power X3-Forth and how to fix it?
If your SolaX Power Inverter displays a DCBus_HW_OVP error, check the PV voltage and confirm that it is within the allowable range. Try to restart the inverter. If the issue persists, contact the installer.
What to do if SolaX Power Inverter displays Grid_FRT error?
If your SolaX Power Inverter displays a Grid_FRT error, check whether the grid voltage is within the allowable range. Then, try to re run the inverter.
What to do if SolaX Power X3-Forth Inverter displays Grid_Unbalance error?
If your SolaX Power Inverter displays a Grid_Unbalance error, check whether the grid voltage is within the allowable range. Then, try to re run the inverter.
What does Remote_Off mean on my SolaX Power X3-Forth Inverter and how to fix it?
If your SolaX Power Inverter displays a Remote_Off error, send the startup command through the app or web interface to re-run the inverter. If the issue continues, contact the installer.
What to do if SolaX Power Inverter shows ISO_Fail error?
If your SolaX Power Inverter displays an ISO_Fail error, check the PV electrical connection and the grounding of the inverter. If problems persist, contact the installer.
General| AC Frequency | 50/60 Hz |
|---|---|
| THD | <3% |
| AC Output Voltage | 230Vac |
| Operating Temperature | -25~+60°C |
| Cooling | Smart Air Cooling |
| Cooling Method | Smart Air Cooling |
To Next Page
